Bundy tube - rolling welded steel tube: Diameter 4.76mm, 6mm, 6.35mm, 8.0mm & 9.52mm etc
Wall thickness of steel tube: 0.7mm
Diameter of low carbon steel wire: 1.0mm to 1.6mm
Mounting bracket - Steel Plate (SPCC) thickness: 0.6mm to 2.0mm
Base mounting plate - SPCC thickness: 0.3mm to 0.4mm
OEM order available for any drawing request.
Electrophoresis coating surface available to avoid a corrosion
Inner cleaning available for R134a, CO2 and other refrigerant cooling request
Tolerance of wire pitch: less 5mm
Available Structure:
Flat type of steel wire on tube condenser
Blending or spiral type of steel wire on tube condenser
Windown blind type of steel tube on plate condenser
Spiral type of steel tube on plate condenser
Aluminum tube on aluminum plate condenser
White coated steel wire on tube condenser & evraporator
Processing Course:
Steel Tube bending
Steel wire brazed
Bracket mounted
Welding inlet tube and outlet tube
Leaking test
Floding and bending
Surface coating
Inspection before packing
Packing in carton or wooden case
Our condenser for refrigerator and freezer - refrigerant R134a:
Residual moisture: ≤20mg/㎡
Residual impurity: ≤30mg/㎡
Residual mineral oil: ≤7mg/㎡
Residual chlorine: ≤0.3mg/㎡
Residual paraffin: ≤0.2mg/㎡
Thickness of cathodic electrophoresis Coating: ≥18μm
Hardness of coating: ≥2 Hours
Impact of coating: 50cm .kg/cm impact, no crack
Adhesion of coating ≥two grade
Flexibility of coating Around R=3D bebd 180°,no crack or no fall off
Color tolerance of △E≤1.5
Corrosion resistant (salt spray GB2423) ≥150h.
The photographs for packing and plant:
In case of more assistance about condenser coils, it's welcome to let us know any time and OEM order available.
